01 / Planning
Your site. Your system.
Review your available factory space, utilities, production objectives and target products with our engineering team.
Manufacturing / Partnership
Franchise With Us
Your market. Your manufacturing journey. Nanolite by your side.
A partnership built around production
Turn your next chapter
into a manufacturing operation.
Explore cellular lightweight concrete production with Nanolite. Our team works with you on equipment selection, factory planning, production requirements and implementation.
Discuss your plans02 / Production
A line that fits.
Select a T-series configuration and discuss material storage, batching, mixing, moulds and handling requirements.
03 / Support
From setup to operation.
Confirm commissioning, operator training, production guidance and after-sales assistance in your project proposal.
Our network / Your next location
Built locally. Connected globally.
Nanolite’s plant network spans multiple locations across Pakistan and the UAE. As we expand into the USA, our franchise approach brings machinery, material supply and production support into one coordinated operation.
Pakistan
Manufacturing locations and local teams support lightweight concrete production, material supply and partner coordination.
United Arab Emirates
Our UAE presence connects production planning, material requirements and regional construction opportunities.
United States
We are expanding into the USA. Discuss location availability, market requirements and the proposed scope of a new operation with our team.
The materials behind your production
Materials supplied.
Production supported.
Nanolite supplies franchise partners with ReadyMix and foaming agent for cellular lightweight concrete production. Material specifications, quantities, ordering schedules and delivery arrangements are agreed around your plant and production plan.
Nano ReadyMix
A bagged dry mix for preparing CLC slurry, used with the agreed water ratio, foaming agent and production method.
- Plan stock around your daily production target.
- Arrange recurring material orders with Nanolite.
- Follow the agreed mixing and storage instructions.
Ready Foaming Agent
Used to generate the foam introduced into the slurry. Dosing, dilution and mixing controls are established for your production configuration.
- Coordinate supplies alongside ReadyMix orders.
- Monitor consumption and material availability.
- Use the prescribed foam-generation settings.
A coordinated franchise system
From the next order
to the next production day.
A franchise combines your local operation with Nanolite’s machinery, material supply and technical guidance. The owner and plant team manage the facility; Nanolite coordinates the agreed equipment, material requirements and support.
- Set production goals and choose a suitable T-series plant.
- Plan ReadyMix and foaming-agent stocks before production.
- Keep material requests, output and operating records organised.
- Review mixing, moulding, curing and handling with your team.
- Agree supply, commissioning and support terms in your proposal.
Nanolite app
Coordinate material requests and production records through the Nanolite app. Dashboard access is assigned by the Nanolite team according to your role.
Franchise ownerPlant managerNanolite team
Open Nanolite appEquipment, investment, supply and support arrangements are confirmed in the franchise proposal. The website does not promise a fixed investment return.
Inside the production layout
Every part has a purpose.
A closer look at the supplied T-20000 layout: nominal production of 20,000 blocks per day, with 100-ton capacity per silo.
1 · Silos: 100 tons each2 · Slurry preparation3 · Mixing modules4 · Control cabin5 · Moulds & rail system6 · Cutting machine123456- Silos100-ton storage capacity per silo for bulk material preparation.
- Slurry preparationMaterial preparation before the controlled foam-mixing stage.
- Mixing modulesHollow-bore shaft spiral mixing distributes foam through the slurry.
- Control cabinThe central operating area in the illustrated automatic plant.
- Moulds & railsMoulds and rail transport support the production workflow.
- Cutting machineIncluded from T-5000 upwards, alongside the rail system.
Find your production system.
Explore equipment configurations with our team. Nominal daily outputs are shown below. Actual output depends on block dimensions, mix, shift length, curing and handling. Investment is quoted for your agreed configuration.
Manual / CLC manufacturing
T-500 Plant
500 blocks per day · nominal output
The T-500 Plant uses manual production for cellular lightweight concrete, with a nominal output of 500 blocks per day. The configuration combines slurry and foam mixing with block moulds, without a cutting machine or bulk silos.
- Slurry mixer
- Foam generation and mixing system
- Block moulds
Manual / CLC manufacturing
T-1000 Plant
1,000 blocks per day · nominal output
The T-1000 Plant uses manual production for cellular lightweight concrete, with a nominal output of 1,000 blocks per day. The configuration combines slurry and foam mixing with battery moulds, without a cutting machine or bulk silos.
- Slurry mixer
- Foam generation and mixing system
- Battery moulds
Semi-automatic / CLC manufacturing
T-5000 Franchise
5,000 blocks per day · nominal output
The T-5000 Franchise uses semi-automatic production for cellular lightweight concrete, with a nominal output of 5,000 blocks per day. The configuration combines slurry and foam mixing with block moulds, a cutting machine and rail transport.
- Slurry mixer
- Foam generation and mixing system
- Block moulds
- Cutting machine
- Rail transport system
Automatic / CLC manufacturing
T-10000 Franchise
10,000 blocks per day · nominal output
The T-10000 Franchise uses automatic production for cellular lightweight concrete, with a nominal output of 10,000 blocks per day. The configuration combines bulk silos, slurry and foam mixing, moulds, a cutting machine and rail transport.
- Slurry mixer
- Foam generation and mixing system
- Block moulds
- Cutting machine
- Rail transport system
- Bulk storage silos · 100-ton capacity each
Fully automatic / CLC manufacturing
T-15000 Franchise
15,000 blocks per day · nominal output
The T-15000 Franchise uses fully automatic production for cellular lightweight concrete, with a nominal output of 15,000 blocks per day. The configuration combines bulk silos, slurry and foam mixing, moulds, a cutting machine and rail transport.
- Slurry mixer
- Foam generation and mixing system
- Block moulds
- Cutting machine
- Rail transport system
- Bulk storage silos · 100-ton capacity each
Fully automatic / CLC manufacturing
T-20000 Franchise
20,000 blocks per day · nominal output
The T-20000 Franchise uses fully automatic production for cellular lightweight concrete, with a nominal output of 20,000 blocks per day. The configuration combines bulk silos, slurry and foam mixing, moulds, a cutting machine and rail transport.
- Slurry mixer
- Foam generation and mixing system
- Block moulds
- Cutting machine
- Rail transport system
- Bulk storage silos · 100-ton capacity each
From first conversation
to your factory floor.
Share your requirements
Tell us your location, target products, available site and intended start date.
Review your proposal
Discuss equipment, layout, utilities, commercial terms and the proposed scope of support.
Prepare your site
Coordinate civil works, electricity, water, material storage and production workflow.
Commission and train
Agree the installation process, trial production, operator training and ongoing assistance.
Planning your partnership
What information should I prepare?
Share your project location, factory area, utility availability, target products, expected output and intended start date.
How is investment determined?
The team prepares a quotation for your agreed equipment and support scope. Site works, utilities, transport, taxes and working capital should be discussed separately.
Can the system grow with my operation?
Discuss your expansion goals during planning so that the proposed layout and configuration can be reviewed against future requirements.
What support is included?
Installation, commissioning, training and service terms are confirmed in the quotation and partnership documentation.
Let’s plan your next operation.
Tell us where you want to build and what you want to produce.
Talk to our team